|
|
|
|
|
|
Feed outlets in a new design
Egebjerg has designed a whole new generation of feed outlets. The design settles
with common principles and provides a range of functional advantages compared
to other brands.
| • |
No feed remnants - no development of microbes |
The shutter is half-round and fits tightly to the feed tube.
When the shutter is closed, no feed remnants will accumulate, which may
affect the pigs health. Furthermore, bridging is prevented |
| • |
Watertight construction |
The feed outlet consists of an upper part and a lower part.
The upper part overlaps the lower part and fits tightly. The design counteracts
penetration of moisture when washing and the feed will always stay dry |
| • |
Tight clamping on feed tube |
Clamping is to be done below the feed tube. It makes the assembling
easier and the way of clamping makes it possible to clamp the outlet completely
tight - also on undersized tubes |
| • |
Effective feed draining |
The lower part of the outlet is oval and shaped in a way which
makes it possible to drill more holes or cut a slot in the feed tube. This
ensures a quick and effective draining of feed |
|
|
|
|
|
The upper part of the feed drop is made of 63 mm transparent plastic. The lower
part is 67.4 mm. The parts are clamped by the new MASTER LOCK clamp, which fixes
the tubes, seals and prevents penetration of water.
The passage from the feed drop to the feeder is tightly closed with our MASTER
COLLAR, a collar in soft plastic.
Furthermore, we offer 63 mm y-tubes which can be used with JUMBO TUBE-O-MAT®
and with two feed lines in phase feeding.
| |
